|
MEGA POWER SAVER is the brilliant outcome of research and technical
cooperation between Taiwan and one of Japan’s largest and most famous
manufacturers of industrial power-saving equipment, with over 30 years of
experience in energy saving.
- Patented in Taiwan: Utility Patent # 179763
- Trademark registered in Taiwan # 01014866
- Certified by JIS (Japan): Certificate # TW9596
- Technical appraisal by Quality Inspecting and Testing Centre for Electrical
Industry Equipments and Meters under the China Electrical Power Research
Institute: Report # 034 (2004)
With time, the efficiency of electrical appliances depreciates, resulting in
higher consumption and undetected waste of electrical power. Factors such as old
wires, diametric variances in wiring can affect voltage current. Unstable
voltage supply causes an increase in resistance and results in poor quality
power supply. The outcome is loss of electrical power and increase in costs.
Loss of electrical power can occur naturally during transmission (this is called
wire loss) or while starting or running electrical appliances. The MEGA POWER
SAVER reduces the electrical charge by stabilizing usage and increasing power
efficiency.
The MEGA POWER SAVER is an excellent tool in today’s environmentally challenged
world.
The main concept behind MEGA POWER SAVER is the control and adjustment of
power voltage from the power supply to the appliance so as to obtain ultimate
efficiency. Most power plants supply higher power than needed.
In essence, voltage will decrease according to cable distance, this is called
voltage drop. Therefore, the power companies increase the voltage to counter
this problem. This is why voltage supply is normally over the base standard.
This means that we need to pay more for unused extra voltage. Because higher
voltage is supplied, there is more wattage (P = VI) consumption.
Product and device manufacturers follow standard voltage specs in the design
of their products. However, they also take into account unstable voltage during
operation of their products. As with computers, TVs, etc., electronic equipment
has a self-adjusting-voltage design to overcome this issue, these are called
energy savers. It has been shown that equipment reduced to as low as 102V while
on standard 110V or higher than 120V, can still function efficiently. Therefore,
MEGA POWER SAVER reduces voltage usage for all your electrical equipment and
appliances, saving on electrical consumption. The equipment runs without a
problem.
The MEGA POWER SAVER, based on real-world field studies and applications,
adds a layer of power management to control the quality of power outputs. MEGA
POWER SAVER partitions higher voltage to let the devices function normally with
the lowest power voltage possible, thus achieving the effect of power saving. If
suddenly the power voltage drops to lower than the required range, i.e. 102V
instead of required 110V, MEGA POWER SAVER will automatically detect and provide
power bypass within as little as twenty thousandth of a second to ensure the
proper functioning of the equipments.
MEGA POWER SAVER is targeted towards the customers with relative power
voltage over the required specification. For example: the standard regulated
voltage is 110V, and the actual supplied voltage is above 110V such like 112,
115, 117, or even 120V. When the supplied power voltage is higher, the effect of
MEGA POWER SAVER is more significant.
MEGA POWER SAVER has a 3-stage voltage monitor and control design;
power-saving action is determined on the source signal indication, after 30
seconds of activation, MEGA POWER SAVER enters the first stage by decreasing
4.25V from the supplied voltage. After one hour of detection, if there is still
room to decrease the voltage, MEGA POWER SAVER then enters the second stage by
decreasing 9.5V. When the lowest voltage setting is set at 102V, when the
supplied voltage is lower than 102V, MEGA POWER SAVER will activate the BY PASS
action.
MEGA POWER SAVER does not consume electricity itself. You can use it
continuously 24 hours a day all year round for 10 years without its affecting
your electrical costs.
Suitable for inductive and capacitive appliances, such as air conditioners,
refrigerators, washing machines, stereos, fluorescent lamps, electric fans,
televisions, induction cookers, microwave ovens etc.
Plug the MEGA POWER SAVER in any of the indoor outlets of single phase 110V
or 220V supplies.
If your monthly electricity consumption is less than 1500kw you will need one
(1) MEGA POWER SAVER, if it is more than 1500kw, you will need a maximum of two
(2) MEGA POWER SAVER’s.
Prior to using the MEGA POWER SAVER, first turn off the indicating light
switch. Turn it on only after having plugged it in the outlet. Before unplugging
the MEGA POWER SAVER, you need to turn the switch off the indicating light.
OTHER FEATURES OF THE Mega Power ENERGY SAVER
- Easy to use, Maintenance free. No wiring required, just plug it in!
- UL Listed and safe.
- One year limited replacement warranty
- Lifespan of 10 years
- Secure online ordering. Just click on the "Order Now!" button below.
• View Your State's Electricity Rate
• View Independent Test Results (.pdf file)
• Test
Report (.pdf file)
The information contained herein is
general in nature and is not intended as legal, accounting or tax advice or
opinion. When using this provision, seek advice from your tax consultant.
| 
